Medium temperature flare Variable

Medium temperature flare Variable MTUv

Based on the modular MTU type gas flare, a shortened version was introduced as the MTU-v.

Areas of application

  • Thermal disposal of combustible excess gases (e.g. in bio, sewage and landfill gas plants)
  • various special gases

Execution of Medium temperature flare Variable MTUv

The MTU-v gas flare with partially concealed combustion is optionally available with or without a gas compressor and is delivered ready for operation according to customer requirements and can be used immediately ▶ Plug & Play!

Long service life guaranteed by high-quality materials (stainless steel) and proven fittings.

Depending on their size, the flares are equipped with one or more gas lines and are available with a gas throughput of 25 - 1200 Bm3/h. If a higher gas throughput is required, we will be happy to manufacture special flares or combined modules for you.

The flare burner starts as soon as the start command and the gas pre-pressure to the flare are present. The automatic gas burner controls the electrical ignition process fully automatically and monitors the flame during operation.

All control functions are housed in a weatherproof and ready-to-connect control cabinet. All components that come into contact with the medium are made of V4A steel, welded, blasted and passivated.

Ignition systems: Direct ignition with high-voltage electrodes or pilot burners.

Flow rate: 25 - 1200 Bm3/ h
Fuel: biogas, landfill gas, special gases
Calorific value: 35 - 100% CH4
Connection: DN 50 - DN 200
Ignition: high voltage 10 kV or pilot burner
Flame monitor: UV cell

concealed combustion > 800 °C
Burner control according to EN746
No bracing required
Low-maintenance operation
Flame tube and base frame made of stainless steel

Anti-freeze package
Control cabinet stainless steel
manual butterfly valve
Pilot burner for start-up operation
Torch length according to customer requirements
Flame tube extension by 1.5m